AVAILABLE
Can-Am Defender HD10 Cab Heater
Description
Ride All Winter Long
You need SuperATV’s Cab Heater because your Can-Am Defender HD10 is made to ride in the winter even if you’re not. It draws engine heat directly from the coolant lines to heat your cab just like a traditional car heater. Install is easy—our kit uses the Defender HD10's own key-on and power terminals to make wiring a cinch. We include hoses, drill bits, and Defender HD10-specific mounting plates to make it as easy as possible to get your heater up and running. With adjustable temperature and fan speeds winter might just become your favorite time to ride.
Defrost Your Windshield
Along with the two vents in the unit itself, we include a defrost vent and hoses to keep your windshield snow, ice, and fog free while you're driving! We route the defrost vents through your dash so they look like they came included from the factory.
Keeps Your Cab Comfortable
Our cab heater is designed to make your cab comfortable when you're on the move. The high-grade radiator hoses are rated from -40°F to 285°F. That means that no matter how hot your engine gets or how cold it is outside, our heater and its components can handle it. Our heater doesn’t just make you more comfortable—it makes your winter better.
Don’t Forget about the Back Row
Don't let the back-row riders freeze! Add a second-row heater to keep the whole cab warm. It comes with everything you need and mounts in front of the middle seat, so it’s easy to reach. With adjustable temperature and fan settings, your passengers can ride in comfort too.
Get Heat in Half the Time with a Quick-Start Flow Valve
Slash your heater's warm-up time in half by installing a quick-start flow valve. It channels all engine coolant directly to your heater core at low engine temps. Once your engine warms up, the valve automatically opens to send coolant through your radiator too.
Add an Idle Flow Pump to Get Hot Air in about 30 Seconds
Get heat moving in your cab in as little as 30 seconds with an idle flow pump! It keeps the coolant circulating through your engine, so it heats up faster even when you're idling or moving slowly.
Add a Grille Cover
Add a grille cover to block the frigid air that flows over your radiator. It increases coolant temps and makes your cab heater warm up quicker. Our grille cover is made with PVC-backed polyester, and it’s easy to install and uninstall. It’s so effective that you can't use it in temps above freezing—it’ll overheat your machine.
Need More Cab Enclosure Components?
Get the most out of your cab heater by completely sealing your UTV's cab with full doors, a roof, and front and rear windshields. Check out our selection of SuperATV's Defender Full Cab Enclosure Components.
You need SuperATV’s Cab Heater because your Can-Am Defender HD10 is made to ride in the winter even if you’re not. It draws engine heat directly from the coolant lines to heat your cab just like a traditional car heater. Install is easy—our kit uses the Defender HD10's own key-on and power terminals to make wiring a cinch. We include hoses, drill bits, and Defender HD10-specific mounting plates to make it as easy as possible to get your heater up and running. With adjustable temperature and fan speeds winter might just become your favorite time to ride.
- Mounts under your dash
- Defrosts your windshield
- Easy to install
- Optional second-row heater
Defrost Your Windshield
Along with the two vents in the unit itself, we include a defrost vent and hoses to keep your windshield snow, ice, and fog free while you're driving! We route the defrost vents through your dash so they look like they came included from the factory.
Keeps Your Cab Comfortable
Our cab heater is designed to make your cab comfortable when you're on the move. The high-grade radiator hoses are rated from -40°F to 285°F. That means that no matter how hot your engine gets or how cold it is outside, our heater and its components can handle it. Our heater doesn’t just make you more comfortable—it makes your winter better.
Don’t Forget about the Back Row
Don't let the back-row riders freeze! Add a second-row heater to keep the whole cab warm. It comes with everything you need and mounts in front of the middle seat, so it’s easy to reach. With adjustable temperature and fan settings, your passengers can ride in comfort too.
Get Heat in Half the Time with a Quick-Start Flow Valve
Slash your heater's warm-up time in half by installing a quick-start flow valve. It channels all engine coolant directly to your heater core at low engine temps. Once your engine warms up, the valve automatically opens to send coolant through your radiator too.
Add an Idle Flow Pump to Get Hot Air in about 30 Seconds
Get heat moving in your cab in as little as 30 seconds with an idle flow pump! It keeps the coolant circulating through your engine, so it heats up faster even when you're idling or moving slowly.
| Quick-Start Flow Valve | Idle Flow Pump |
| Gets you heated air twice as fast | Warms up heater in under 30 seconds |
| Diverts coolant to your heater core at low temps | Actively pumps coolant at idle to increase heater temps |
| Only one quick-start flow valve needed for front- and second-row heaters | Only one idle flow pump needed for front- and second-row heaters |
| Combine our Quick-Start Flow Valve and Idle Flow Pump for maximum heat as quickly as possible when you’re slow or idle. | |
Add a Grille Cover
Add a grille cover to block the frigid air that flows over your radiator. It increases coolant temps and makes your cab heater warm up quicker. Our grille cover is made with PVC-backed polyester, and it’s easy to install and uninstall. It’s so effective that you can't use it in temps above freezing—it’ll overheat your machine.
Need More Cab Enclosure Components?
Get the most out of your cab heater by completely sealing your UTV's cab with full doors, a roof, and front and rear windshields. Check out our selection of SuperATV's Defender Full Cab Enclosure Components.
- Adjustable Temperature and fan speeds
- 360° adjustable vents
- High-grade radiator hoses—rated -40°F to 285°F
- Includes defrost hose and vent
- 3.4 amps at 13.7 volts
- Capable of 14,600 BTU at 135 CFM
- Built-in shutoff valve
- Easy install—includes all installation hardware and instructions
- Heater control box measures 10" x 4.5" x 11.75"
- Optional second-row heater
- Optional grille cover boosts heat output in cold temperature
- Add a quick-start flow valve and an idle flow pump to get heated air faster
- Can-Am Defender HD 10 DPS : 2016+
- Can-Am Defender HD 10 Mossy Oak : 2018+
- Can-Am Defender HD 10 XMR : 2018+
- Can-Am Defender HD 10 XT : 2016+
- Can-Am Defender HD 10 XT Cab : 2016+
- Can-Am Defender HD 10 XTP : 2018+
- Can-Am Defender HD 10 6x6 : 2020+
- Can-Am Defender Limited HD 10 : 2020+
- Can-Am Defender Pro HD 10 : 2020+
- Can-Am Defender MAX HD 10 DPS : 2017+
- Can-Am Defender MAX HD 10 Limited : 2020+
- Can-Am Defender MAX HD 10 Lone Star Edition : 2018+
- Can-Am Defender MAX HD 10 XMR : 2019+
- Can-Am Defender MAX HD 10 XT : 2017+
- Can-Am Defender MAX HD 10 XT Cab : 2017+
NOTE:
- Drilling through plastic required. All necessary bits are included.
- Second-row heater may limit space to the center-rear passenger.
Features
Features are listed in the description.
Fitment
Fitment is listed in the description.
CUSTOMER FEEDBACK
Reviews & Product Q&A
No customer reviews yet.
Ask a Product Question
KEEP BROWSING