J FAB PRODUCTS
Maximized CV size for ultimate strengthHigh articulation anglesIndustry leading 4340 chromoly for unmatched longevityPrecision engineered cage and housing for reduced friction and a smooth range of motionProprietary heat treat processBoot...
$95.95
Made with heavy-duty forged 4340 chromoly steel7/16" forks and 1-5/8" neckMaximized dimensions for ultimate strengthFits OEM and Rhino Driveline Prop ShaftFitmentPolaris RZR XP 1000: 2014-2023Polaris RZR XP 4 1000: 2014-2023
From $100.95
Designed for 44 mm Polaris wheel bearingsAllows you to grease bearings without removing the knuckleO-ring gasket promotes a perfect sealMade of billet aluminum for a precise fit and continual usageFitmentFront...
$34.95
Custom-fit, tight no-bounce designReinforced grommetsRubber-coated zipper pullsMesh phone and MP3-player pocketKey-ring loopStainless mounting hardwareBuilt-in knee protectorsApproximately 9 x 12 x 2.25 inchesUV-resistant, water-resistant coated materialFitmentPolaris RZR XP 1000: 2014-2023Polaris RZR...
From $95.95
Direct Polaris OEM replacement needle bearing U-jointStronger than stockHardened steel body3-month warranty against breakageFits both OEM and SuperATV prop shaftsFitmentFront and rear: Polaris RZR XP 1000 and XP 4 1000,...
$54.95
Replacement kit includes the boot, clip, bands, and greaseMade of high-strength rubber or TPEE (Thermoplastic Elastomer)Easy to installDesigned to work with Rhino 2.0 Axles onlyFitmentFor SuperATV Rhino 2.0 axles used...
$39.95
Needleless bearing design reduces wear from rust and debris4340 chromoly steel with 630 bronze caps30% larger-diameter post than OEMNearly 3X stronger than stockGrease fittings in the joint capsFits OEM and...
$105.95
Eliminates speed restrictions caused by aftermarket harnessesDesigned for 4- or 5-point aftermarket harnessesInstalls in under 10 minutesNo cutting, splicing, or soldering requiredFitmentPolaris RZR XP 1000: 2015-2023Polaris RZR XP 4 1000:...
$39.95
Ships fully assembled and ready to install—just add oilCast or billet aluminum housing7075-T6 aluminum Sprague carrierHob-cut ring and pinion gears3/8-inch pinion-gear tube wallsReinforced mounting locations with helical insertsServiceable bolt-on pinion...
From $1,250.95
Removes drive clutches on Polaris UTVsHeavy-duty, heat-treated carbon-steel construction3/4-16 threadReplaces Polaris OEM part 2872085FitmentPolaris RZR XP 1000: 2014-2023Polaris RZR XP 4 1000: 2014-2023
$54.95
Sold in pairs4/156 mm bolt patternM12 x 1.5 lug-stud threadHeavy-duty 6061 billet aluminumAvailable in 1.25-inch, 1.5-inch, and 2-inch widthsCorrects wheel offset and helps prevent tire and shock rubbingFitmentPolaris RZR XP...
From $100.95
Up to 8.5 inches of protection per side versus 4 inches stockProtects against rocks, dirt, mud, sand, and other debris3/16-inch HDPE constructionHardware and installation instructions includedOEM fender flares are not...
From $323.95
X24 Tech dual PTFE bushings reduce slop and wear65% larger housing than stockOver 50% less wear than OEM after 15,000 cyclesGrease fitting for the rack gearsSteel swaged-tube, solid-steel-bar, and billet-aluminum-hex...
From $423.95
Protects against flying mud and debrisReduces dust suction caused by using a front windshield aloneClear and tinted 1/4-inch polycarbonate choicesScratch-resistant light-tint option uses XR Optic hard coatingPreassembledMade in the USAFitmentPolaris...
From $169.95
3/16-inch heavy-duty steel platingLaser-cut and CNC brake-press-bent constructionUV-resistant powder coatingNo-drill installationCompatible with many OEM and aftermarket winchesFitmentPolaris RZR XP 1000: 2014-2023Polaris RZR XP 4 1000: 2014-2023
From $84.95
Chromoly-steel constructionRedesigned CV joints for high articulation anglesSynthetic greaseTear-resistant boots and sealsStronger-than-OEM replacementOne-year warranty excluding bootsFitmentPolaris RZR XP 1000: 2014-2023Polaris RZR XP 4 1000: 2014-2023Polaris RZR XP 1000 High Lifter...
$211.95
3/16-inch steel constructionReinforces A-arm mounts, frame supports, and shock mountsCompatible with OEM and SuperATV A-armsFitmentPolaris RZR XP 1000: 2014-2023Polaris RZR XP 4 1000: 2014-2023
From $189.95
Billet aluminum constructionWider spider and reinforced towersCompatible with the OEM secondary clutch2-way bearing with no engine brakingIncludes clutch assembly, rollers, and roller pinsWeights and springs are not included3-year warrantyFitmentPolaris RZR...
$1,112.95
Sold individually. Price is for one mounted tire and wheel.
$623.90
Sold individually. Price is for one mounted tire and wheel.
$598.90
Designed for year-round riding—can be closed, vented, or fully openMade of 1/4” polycarbonate—250x stronger than glass and 25x stronger than acrylicUtilizes our proprietary XR Optic Hard CoatingFits the contours of...
From $389.95
Need Help Choosing the Right Ball Joint? Super Duty 300M For the hardcore rider. SuperATV’s strongest ball joint on the market is 2.25x stronger than stock. Can withstand 29,000 lbs...
From $49.95
Made with self-lubricating UHMWLow wear characteristics give you more miles than stock bushingsCNC machined for a perfect fitIncludes enough bushings to replace all 4 front A-armsFitmentPolaris RZR XP: 2024-2025Polaris RZR...
$172.95
Adjustable fan speeds360° adjustable ventsIncludes defrost hoses and ventsBuilt-in shutoff valve5.2 amps at 13.6 voltsCapable of 20,000 BTU at 135 CFMHigh-grade radiator hoses—rated -40°F to 285°FIP67 ratingFitmentPolaris RZR XP: 2024+Polaris...
From $529.95
Shaft diameter is .5” larger than stockShaft wall is .120” vs stock’s .088”Made of 4130 chromoly tubing (stock is plain carbon steel)Includes a prop shaft guardBillet aluminum carrier bearingUses a...
From $1,218.95
Nearly 2 times stronger than stockMade with 4340 chromoly steelProprietary heat treatment for superior strength and longevityOperates at high CV anglesA massive increase in shaft sizeField and lab tested for...
$249.95
Protects against debris and the elementsMade of 1/4” polycarbonate—250x stronger than glass and 25x stronger than acrylicPreinstalled bulb seal for effortless installationOptional proprietary XR Optic Hard Coating for unmatched scratch...
From $119.95
Designed for year-round riding—can be closed, vented, or fully openMade of 1/4” polycarbonate—250x stronger than glass and 25x stronger than acrylicOpt for our proprietary XR Optic Hard Coating for unmatched...
From $324.95
Adjustable fan speeds360° adjustable ventsIncludes defrost hoses and ventsBuilt-in shutoff valve5.2 amps at 13.6 voltsCapable of 20,000 BTU at 135 CFMHigh-grade radiator hoses—rated -40°F to 285°FIP67 ratingFitmentPolaris RZR XP 1000:...
From $529.95
Shaft diameter is .5” larger than stockShaft wall is .120” vs stock’s .088”Made of 4130 chromoly tubing (stock is plain carbon steel)Uses a strong and versatile CV jointMade of 4130...
From $333.95
Two times stronger than stockMade with 4340 chromoly steelProprietary heat treatment for superior strength and longevityOperates at high CV anglesA massive 4mm increase in shaft sizeField and lab tested for...
$249.95
(12) Large bushings(4) Small bushings(6) Replacement metal sleevesFitmentPolaris RZR XP 1000: 2014–2023Polaris RZR XP 4 1000: 2014–2023
From $122.95
Need Help Choosing the Right Ball Joint? Super Duty 300M For the hardcore rider. SuperATV’s strongest ball joint on the market is 2.25x stronger than stock. Can withstand 29,000 lbs...
From $49.95
Ensures smooth, friction-free movement of the hub assemblyRubber-coated exterior creates a seal at the hub for constant pressureDesigned to keep out water, dirt, and sandPacked with marine-grade grease for optimal...
$44.95
Available in 6061 billet aluminum or A380 cast aluminumGreaseable and fully sealed for durability in any conditionsSelf-aligning bearing reduces vibrationLocking collar keeps bearing secureTwo-piece design makes installation a breezeFitmentPolaris RZR...
From $105.95
Made with ultra-strong aramid fiber cord to prevent separationBuilt for high strength, flexibility, and heat resistanceHigher power transfer through your clutchSmooth engagementBuilt for thousands of miles of abuseFitmentPolaris RZR XP...
$180.95
Uses sintered copper pads for extreme durabilityFour times more durable than stockMade with a steel backing plateExcellent gripping power in wet or dry conditionsFitmentPolaris RZR XP 1000: 2014–2023Polaris RZR XP...
$59.95
Straight upper radius-arm pair for 2024–2026 Polaris RZR XP 1000 two-seat models.
From $249.00
Heavy-duty left-and-right steering tie-rod kit built for the verified 2017–2018 rack, spindle, thread, and travel requirements.
From $449.99
Model-specific rear protection built around the 2017–2018 frame, body, exhaust, hitch, suspension, tire, cargo, and service-clearance requirements.
From $699.99
Model-specific front protection built around the 2017–2018 frame, body, radiator, winch area, tire, and service-clearance requirements.
From $699.99
Model-specific left-and-right tubular tree-kicker slider pair. The bent outer rail helps push the machine away from trees and rocks while the reinforced inner structure transfers impacts into verified chassis mounting...
From $749.99
A separate formed flat-plate slider design—not the tubular tree-kicker style. The model-specific formed-steel shell wraps the outside and underside of the rocker with a smooth angled boat-side surface and internally...
From $849.99
Left-and-right high-clearance lower radius-arm pair with a boxed profile designed to improve ground clearance while retaining the verified 2017–2018 mounting geometry.
From $449.00
Left-and-right straight upper radius-arm pair built around the verified 2017–2018 rear suspension geometry.
From $249.00
Clean up the rear suspension with J Fab straight upper radius arms.
From $249.00
Clean up the rear suspension with J Fab straight upper radius arms.
From $249.00
Model-specific heavy-duty left-and-right steering tie-rod kit. J Fab will verify rack-side and knuckle-side attachment details, total length, thread direction, steering travel, wheel and brake clearance, and any lift or aftermarket...
From $449.99
A separate formed flat-plate slider design—not the tubular tree-kicker style. The model-specific 1/8-inch formed-steel shell wraps the outside and underside of the rocker with a smooth angled boat-side surface, an...
From $1,049.99
Model-specific heavy-duty left-and-right steering tie-rod kit. J Fab will verify rack-side and knuckle-side attachment details, total length, thread direction, steering travel, wheel and brake clearance, and any lift or aftermarket...
From $449.99
A separate formed flat-plate slider design—not the tubular tree-kicker style. The model-specific 1/8-inch formed-steel shell wraps the outside and underside of the rocker with a smooth angled boat-side surface, an...
From $849.99
Model-specific left-and-right high-clearance lower rear radius-arm pair using J Fab’s approved boxed lower-arm design family. This listing is for the lower radius arms only; upper arms are sold separately. Final...
From $449.00
Model-specific left-and-right tubular tree-kicker slider pair. The bent outer tube follows the long four-seat body and both doors, while the inner structure transfers impacts into verified chassis mounting points instead...
From $749.99
Model-specific rear protection built around the platform’s actual frame, body, exhaust, hitch, suspension, tire, cargo, and service-clearance requirements. The listing is for the rear bumper only; final brackets, hardware, and...
From $699.99
Model-specific front protection built around the platform’s actual frame, body, radiator, winch, tire, and service-clearance requirements. The listing is for the front bumper only; final brackets, hardware, and installed clearances...
From $699.99
Model-specific left-and-right tubular tree-kicker slider pair. The bent outer tube follows the two-seat rocker and rear tire opening, while the inner structure transfers impacts into verified chassis mounting points instead...
From $749.99
Model-specific rear protection built around the platform’s actual frame, body, exhaust, hitch, suspension, tire, cargo, and service-clearance requirements. The listing is for the rear bumper only; final brackets, hardware, and...
From $699.99
Front bumper for 2019–2023 Polaris RZR XP 1000 models.
From $699.99
Item may vary by make/model · Dash/window frame not included
The base price includes the switch-panel insert only. The surrounding factory dash/window frame shown in the installed photo is not included.
From $149.99
High-clearance lower radius-arm pair for 2019–2023 Polaris RZR XP 1000 models.
From $449.00
