J FAB PRODUCTS
Beef Up Your U10 Pro’s FrameAdding larger tires, lift kits, and heavy accessories can put extra stress on your CFMOTO UForce U10 Pro's frame. SuperATV’s Frame Stiffener reinforces key chassis...
$129.95
Big Utility in a Small PackageWhen bigger isn’t better, the SuperATV 500 Lb. Small Winch steps up. Its compact design solves the problem of bulky equipment in tight spaces, making...
$224.95
Protect Your Maverick R MAX’s UndercarriageThe Can-Am Maverick R MAX is built to tackle tough terrain, but the trail always has surprises. SuperATV's Full Skid Plate adds the underbody protection...
$799.95
Protect Your Defender HD5Rocks, logs, and other trail hazards can leave their mark on your machine. SuperATV’s Heavy-Duty Nerf Bars protect your Can-Am Defender HD5’s bodywork from impacts that cause...
$384.95
Give Your Defender HD7 More ProtectionYour Can-Am Defender HD7 can handle tough trails, but its bodywork can still pick up scratches along the way. SuperATV’s Heavy-Duty Nerf Bars shield the...
$384.95
Shield Your Defender HD8Even a tough utility machine needs protection from rough terrain. SuperATV’s Heavy-Duty Nerf Bars defend your Can-Am Defender HD8’s bodywork against rocks, logs, and tight trail obstacles....
$384.95
Protect the Sides of Your Defender HD9Rough trails can put your machine’s bodywork in harm’s way. SuperATV’s Heavy-Duty Nerf Bars give your Can-Am Defender HD9 extra protection from rocks, logs,...
$384.95
Add More to Your Defender HD5Make your rig more versatile with SuperATV’s Can-Am Defender HD5 Sport Accessory Bar. Its powder-coated steel construction gives you a strong platform for mounting extra...
From $818.95
Equip Your Defender HD7 for MoreSuperATV’s Can-Am Defender HD7 Sport Accessory Bar gives you more ways to customize your machine for work or play. It’s made from powder-coated steel and...
From $818.95
Build Out Your Defender HD9Make room for more accessories with SuperATV’s Can-Am Defender HD9 Sport Accessory Bar. Its powder-coated steel construction creates a solid mounting platform above your bed. Two...
From $818.95
Customize Your Defender HD8Build a setup that works for you with SuperATV’s Can-Am Defender HD8 Sport Accessory Bar. This powder-coated steel bar includes two MOLLE panels for convenient accessory mounting....
From $818.95
Bigger RZR XP S Axles that are Built for BattleYour Polaris RZR XP S is made for tough rides and hard work, but stock axles don’t always keep up when...
$249.95
Full VersatilityYou need the full protection from the elements that a front windshield gives you, but you also want total airflow control for when the ride gets warm. That’s why...
From $319.95
Sharper Handling for Your Turbo SYour Polaris RZR Turbo S deserves more than flimsy stock end links. Upgrade to Assault Industries Heavy Duty Front Sway Bar End Links and give...
$189.95
Beef-Up Your RZR Pro XP SuspensionAssault Industries Heavy Duty Front Sway Bar End Links for the Polaris RZR Pro XP combine lightweight construction, exceptional durability, and suspension-tuning capability. Assault Industries...
$200.95
Protect Your Tailgate with a Defender HD7 Rear BumperYour Can-Am Defender HD7 works hard, so don't let one careless bump leave your tailgate covered in dents and scratches. SuperATV's Rear...
$344.95
Rear-End Protection That Works on Your Defender HD8Keep your Can-Am Defender HD8 looking its best with a Rear Bumper from SuperATV. The rugged steel tubing helps shield your rear bodywork...
$344.95
Tough Defense for Your Defender HD9From tight trails to busy job sites, your Can-Am Defender HD9's rear end takes plenty of abuse. SuperATV's Rear Bumper is built from durable steel...
$344.95
Built to Protect Your Defender HD10A little extra protection goes a long way when you're working or riding in your Can-Am Defender HD10. SuperATV's Rear Bumper uses heavy-duty steel tubing...
$344.95
Keep Your Defender HD8 MAX Ready for the TrailYour Defender HD8 MAX works hard, but the trails can be rough on its body. SuperATV’s Heavy-Duty Nerf Bars add extra side...
$674.95
Give Your Defender HD9 MAX Extra Side ProtectionYou don’t always go easy on your machine. SuperATV’s Heavy-Duty Nerf Bars help protect your Can-Am Defender HD9 MAX from bumps, scrapes, and...
$674.95
Protect Your Defender HD10 MAX from Trail DamageWhen you’re pushing your Defender HD10 MAX, you need protection that can keep up. SuperATV’s Heavy-Duty Nerf Bars shield your machine’s sides from...
$674.95
Keep the Mud Where It Belongs with Can-Am Defender HD8 Fender FlaresYour Defender HD8 was made to take on rough trails, but that doesn’t mean you need mud and dirt...
$506.95
Take On the Mess with Can-Am Defender HD10 Fender FlaresIf your Can-Am Defender HD10 spends its time in deep mud and messy trails, SuperATV’s Fender Flares are a must-have upgrade....
$506.95
Get Your Defender HD8’s Power BackLarger tires give your Can-Am Defender HD8 the extra clearance and aggressive look you want, but they can also make your machine feel a little...
From $269.95
More Torque for Bigger Tires on Your Defender HD9When you upgrade your Can-Am Defender HD9 with bigger tires, your machine has to work harder to get moving. A SuperATV Transmission...
From $269.95
Keep Your Defender HD10 Running StrongYour Can-Am Defender HD10 can handle a lot, but bigger tires can take a toll on your low-end power. SuperATV’s Transmission Gear Reduction Kit is...
From $269.95
Transform Your Teryx H2 with GDP PortalsGive your Kawasaki Teryx H2 the muscle it needs with SuperATV’s 4” GDP Portal Gear Lift. This kit combines extra ground clearance with a...
$4,324.95
Enhanced Strength and Front-End RigidityAssault Industries designs the F-22 heavy-duty shock tower brace to reinforce the front end of the Maverick X3. This upgrade increases structural rigidity and reduces chassis...
$399.95
Protect Your Ranger 500’s Cab with Style and StrengthKeep mud and other trail debris out of your cab and where it belongs with SuperATV’s Ranger 500 HDPE Half Doors. They’re...
$799.95
Visible HD5 Signals Built for Off-RoadUpgrade your Can-Am Defender HD5 with SuperATV’s Deluxe Self-Canceling Turn Signal Kit. Our turn signal kit auto cancels, so you don’t have to worry about...
From $434.95
A Self-Canceling Turn Signal Kit Built for the Defender HD7Upgrade your Can-Am Defender HD7 with SuperATV’s Deluxe Self-Canceling Turn Signal Kit. The automatic canceling feature turns your signals off after...
From $434.95
A Smarter Turn Signal Setup for Your Can-Am Defender HD8Make every ride in your Can-Am Defender HD8 easier with SuperATV’s Deluxe Self-Canceling Turn Signal Kit. Your blinkers automatically shut off...
From $434.95
Reliable Turn Signals for the Can-Am Defender HD9Give your Can-Am Defender HD9 a clean, convenient upgrade with SuperATV’s Deluxe Self-Canceling Turn Signal Kit. It’s designed for a simple install, so...
From $434.95
Even More Storage for Your Defender HD5Upgrade your rig’s storage space with SuperATV’s Can-Am Defender HD5 Outfitter Bed Rack. Hunting, working, or overlanding, this bed rack will help you get...
From $1,163.95
Get More Storage for Your Defender HD7Take your Can-Am Defender HD7’s cargo capacity to the next level with SuperATV’s Outfitter Bed Rack. Whether you're hauling tools to the jobsite, packing...
From $1,163.95
Pack More on Your Defender HD8 Your Can-Am Defender HD8 is built to work hard—our Outfitter Bed Rack helps it carry even more. It gives you extra space for coolers,...
From $1,163.95
Get More Out of Your Defender HD9No matter where your Can-Am Defender HD9 takes you, SuperATV's Outfitter Bed Rack makes it easier to bring everything along. It's perfect for overlanding...
From $1,163.95
The Fuel Injector Your Ranger DeservesKeep your Polaris Ranger running strong with a new fuel injector. A worn-out injector can lead to hard starts, poor throttle response, and reduced fuel...
$105.95
A Heavy-Duty Ace Fuel Injector ReplacementIf you have trouble starting your Polaris Ace and notice it's burning through more fuel or running a little rough, it might be time to...
$105.95
Replace Your Sportsman Fuel InjectorWhen your Polaris Sportsman starts running rough, using more fuel, or losing power, a worn fuel injector could be the reason. SuperATV’s Up & Running Fuel...
$105.95
Defender HD10 Long-Travel Axles Built to LastGet the strength and articulation your Can-Am Defender HD10’s long-travel suspension demands. Rhino 2.0 Long-Travel Axles combine 4340 chromoly steel, advanced heat treatment, and...
$286.95
The Fuel Injector You NeedAvoid starting issues, burning more gas, and your engine not running smoothly by replacing your old fuel injector on your Polaris RZR. SuperATV’s Up & Running...
$105.95
Transform Your Defender HD7 with GDP PortalsGive your Can-Am Defender HD7 the lift and torque it needs to tackle tougher terrain. SuperATV’s 6” Portal Gear Lift combines extra ground clearance...
From $2,889.95
The Ultimate Enhancement for Your Defender HD7Your Can-Am Defender HD7 is a dependable machine for getting the job done, but it can do even more with the right upgrade. SuperATV’s...
From $4,653.95
Mount Your Winch Easily to Your GrizzlyRegardless of what kind of riding you do in your Yamaha Grizzly, a winch is a must-have. You never know when you’ll need to...
From $64.95
An Easy Way to Mount Your Winch on Your KodiakYour Yamaha Kodiak is made to work hard, but even the toughest machines can use a little help when things get...
From $64.95
Ranger XP 900 Crew Protection That’s Ready for Whatever the Trail BringsThe Polaris Ranger XP 900 Crew doesn't shy away from rough conditions, and neither should your roof. SuperATV’s Plastic...
$701.95
Stay Comfortable and Protected in Your Ranger XP 1000 CrewLong days in your Polaris Ranger XP 1000 Crew are more enjoyable when you're not getting soaked or baked by the...
$701.95
Ranger 1000 Diesel Crew Protection That’s Ready for AnythingYour Polaris Ranger 1000 Diesel Crew spends its days working hard, so give it protection that can handle the same kind of...
$701.95
Stay Covered in Your Ranger 1000 CrewWhether you're working around the property or heading out for a ride, your Polaris Ranger 1000 Crew deserves protection from whatever the day brings....
$701.95
Cover Your Ranger XP 900 From the ElementsGive your Polaris Ranger XP 900 some added protection with a roof designed for hard-working rides. It helps keep the sun off you...
$518.95
Protection for Work or Play in Your Ranger XP 1000Your Ranger XP 1000 sees plenty of action, so give it a roof that can keep up. The rugged design provides...
$518.95
Stay Covered Wherever You Ride in Your Ranger 1000 DieselA little extra protection goes a long way when you're putting your Ranger 1000 Diesel to work. This roof gives you...
$518.95
Give Your Defender HD7 More SupportOnce you start pushing your Can-Am Defender HD7 harder, your suspension has to deal with more than stock demands. Big tires, forward-offset A-arms, and GDP...
$473.95
Keep Your Defender HD8 Ready for AnythingOne upgrade can change the demands on your Can-Am Defender HD8, and stacking several together can make a huge difference. Bigger tires and GDP...
$473.95
Add Strength Where It Counts on Your Defender HD9The more you upgrade your Can-Am Defender HD9, the more your suspension has to handle. Heavy-duty tires, forward-offset A-arms, and GDP Portals...
$473.95
Give Your Defender HD10 the Support it NeedsThe Defender HD10 has plenty of muscle, but serious suspension upgrades can still put a lot of force through the chassis. If you're...
$473.95
Give Your HD7 Some Extra SupportYour idea of a good time can put some serious stress on your Can-Am Defender HD7’s frame. SuperATV’s Weld-In Gusset Kit helps reinforce the A-arm...
$217.95
Reinforcement Where It Counts on Your Defender HD8Your Can-Am Defender HD8 can handle plenty of abuse, but your frame still takes a beating along the way. SuperATV’s Weld-In Gusset Kit...
$217.95
Keep Your HD9 Ready for MoreThe harder you ride your Can-Am Defender HD9, the more stress you’re putting on the frame. SuperATV’s Weld-In Gusset Kit gives those key areas some...
$217.95
Toughen Up Your Defender HD10Your Can-Am Defender HD10 is ready to work hard, but that doesn’t mean the frame should have to take all the abuse. SuperATV’s Weld-In Gusset Kit...
$217.95
Ultra-Strong and Stylish Defender HD11 Half DoorsWhether you're working or hitting the trails, SuperATV’s Can-Am Defender HD11 HDPE Half Doors help keep mud, dust, rocks, and trail debris where they...
$799.95
Axles Built for Hard RidesYour Polaris Ranger SP 570 is built to work hard and take on tough trails. Make sure its axles can keep up with Heavy-Duty Rhino Brand...
$169.95
Seal Out the Trail and Protect Your Defender HD11’s CabKeep sticks, mud, and debris where they belong—outside your cab. Our HDPE Half Doors for Can-Am Defender HD11 MAX add strength,...
$799.95
More Clearance and More PerformanceGoing for a ride in your Defender HD5 is the highlight of your weekend. Load up the family and hit the trail… just don’t be surprised...
$528.95
Includes left and right mirrors6.5" x 4.1" convex mirrorComes with snap-on chevrons in multiple colorsWide viewing angleHeavy-duty billet aluminum clampsFits 1.75” cagesMounts quickly and easilyFitmentPolaris RZR XP 1000: 2014-2023Polaris RZR...
$84.95
Greaseable self-aligning bearingMounting bolts and washersThreadlockerFitmentFor SuperATV carrier bearing codes BEA-P-008 and BEA-P-011 used on Polaris RZR XP 1000 and XP 4 1000, 2014-2023.
$59.95
4340 hardened chromoly steel constructionTwo-piece threaded design doesn’t require a snap ringEasily adjustable, rebuildable, and greaseableRobust boot retaining ring prevents water intrusionFitmentPolaris RZR XP 1000: 2014-2023Polaris RZR XP 4 1000:...
From $153.95
17” x 3” convex mirrorUltra wide viewing angleAluminum clamps and mirror frameMounts quickly and easily to 1.75” diameter frames and PRO-FIT cagesFitmentPolaris RZR XP 1000: 2014-2023Polaris RZR XP 4 1000:...
$69.95
Designed for use with SuperATV Heavy-Duty Carrier BearingsAdds an easy-access grease fitting to the plastic center consoleNo more removing plastic just to grease your bearingFlexible tubing lets you place the...
$39.95
DOT approved and stamped laminated safety glassLightly tinted to reduce glareSteel frame with UV-resistant powder coatingBuilt-in vent is easy to open and close by handManual wiper includedEasy to installFitmentPolaris RZR...
$399.95
Steel constructionOEM dimensionsOEM-quality boots and greaseOEM-equivalent strength1-year warranty—manufacturing defects only4140 chromoly steel constructionLarger componentsTPEE bootsAdvanced greaseStronger than OEMFitmentPolaris RZR XP 1000: 2014-2023Polaris RZR XP 4 1000: 2014-2023High Lifter Edition: 2015-2023Trails...
From $95.95
Made of cast aluminumDesigned to address OEM weak pointsMore support ribs and gussets than stockExtra fins help keep your transmission cool68% more metal reinforcing the snorkel tube and axle output...
From $573.95
Made with steel and billet aluminum for long-lasting durabilityWorks on 44 mm and 40 mm wheel bearingsDoesn’t require a hydraulic press or hammerLines itself up perfectly for flawless removal and...
$162.95
High-quality double-lipped sealsReplaces hub and input sealsOptional double-row angular contact pinion bearing is extremely durableUpgrade to hub bearings for high strengthFitmentPolaris RZR XP 1000: 2014-2023Polaris RZR XP 4 1000: 2014-2023
From $59.95
45mm x 3mm steel tubingSlip-resistant 1.75" tube clampsAccepts up to a 30" tirePowder coated for long lasting durabilityEasy, bolt-on installationFitmentPolaris RZR XP 1000: 2014-2023Polaris RZR XP 4 1000: 2014-2023
$264.95
26% improved cooling capacity100% aluminumOEM fitEngineering for high performance enginesHigh efficiency air finsFitmentPolaris RZR XP 1000: 2014-2023Polaris RZR XP 4 1000: 2014-2023
$256.95
Available StylesClear scratch resistantLight tint scratch resistantDark tint standard1/4" polycarbonate available with and without tintScratch-resistant windshields are hard coated on both sides for extreme durabilityProtects against chemical and UV attackContoured...
From $84.95
Fits standard 2” attachmentsMade of 3/16” heavy-duty steelIncludes cotter pin and hitch pinCut out for access to differential oil plug1,500 lb. max towing capacityFitmentPolaris RZR XP 1000: 2014-2023Polaris RZR XP...
$105.95
Maximized CV size for ultimate strengthHigh articulation anglesIndustry leading 4340 chromoly for unmatched longevityPrecision engineered cage and housing for reduced friction and a smooth range of motionProprietary heat treat processBoot...
$95.95
Made with heavy-duty forged 4340 chromoly steel7/16" forks and 1-5/8" neckMaximized dimensions for ultimate strengthFits OEM and Rhino Driveline Prop ShaftFitmentPolaris RZR XP 1000: 2014-2023Polaris RZR XP 4 1000: 2014-2023
From $100.95
Designed for 44 mm Polaris wheel bearingsAllows you to grease bearings without removing the knuckleO-ring gasket promotes a perfect sealMade of billet aluminum for a precise fit and continual usageFitmentFront...
$34.95
Custom-fit, tight no-bounce designReinforced grommetsRubber-coated zipper pullsMesh phone and MP3-player pocketKey-ring loopStainless mounting hardwareBuilt-in knee protectorsApproximately 9 x 12 x 2.25 inchesUV-resistant, water-resistant coated materialFitmentPolaris RZR XP 1000: 2014-2023Polaris RZR...
From $95.95
Direct Polaris OEM replacement needle bearing U-jointStronger than stockHardened steel body3-month warranty against breakageFits both OEM and SuperATV prop shaftsFitmentFront and rear: Polaris RZR XP 1000 and XP 4 1000,...
$54.95
Replacement kit includes the boot, clip, bands, and greaseMade of high-strength rubber or TPEE (Thermoplastic Elastomer)Easy to installDesigned to work with Rhino 2.0 Axles onlyFitmentFor SuperATV Rhino 2.0 axles used...
$39.95
Needleless bearing design reduces wear from rust and debris4340 chromoly steel with 630 bronze caps30% larger-diameter post than OEMNearly 3X stronger than stockGrease fittings in the joint capsFits OEM and...
$105.95
Eliminates speed restrictions caused by aftermarket harnessesDesigned for 4- or 5-point aftermarket harnessesInstalls in under 10 minutesNo cutting, splicing, or soldering requiredFitmentPolaris RZR XP 1000: 2015-2023Polaris RZR XP 4 1000:...
$39.95
Ships fully assembled and ready to install—just add oilCast or billet aluminum housing7075-T6 aluminum Sprague carrierHob-cut ring and pinion gears3/8-inch pinion-gear tube wallsReinforced mounting locations with helical insertsServiceable bolt-on pinion...
From $1,250.95
Removes drive clutches on Polaris UTVsHeavy-duty, heat-treated carbon-steel construction3/4-16 threadReplaces Polaris OEM part 2872085FitmentPolaris RZR XP 1000: 2014-2023Polaris RZR XP 4 1000: 2014-2023
$54.95
Sold in pairs4/156 mm bolt patternM12 x 1.5 lug-stud threadHeavy-duty 6061 billet aluminumAvailable in 1.25-inch, 1.5-inch, and 2-inch widthsCorrects wheel offset and helps prevent tire and shock rubbingFitmentPolaris RZR XP...
From $100.95
Up to 8.5 inches of protection per side versus 4 inches stockProtects against rocks, dirt, mud, sand, and other debris3/16-inch HDPE constructionHardware and installation instructions includedOEM fender flares are not...
From $323.95
X24 Tech dual PTFE bushings reduce slop and wear65% larger housing than stockOver 50% less wear than OEM after 15,000 cyclesGrease fitting for the rack gearsSteel swaged-tube, solid-steel-bar, and billet-aluminum-hex...
From $423.95
Protects against flying mud and debrisReduces dust suction caused by using a front windshield aloneClear and tinted 1/4-inch polycarbonate choicesScratch-resistant light-tint option uses XR Optic hard coatingPreassembledMade in the USAFitmentPolaris...
From $169.95
3/16-inch heavy-duty steel platingLaser-cut and CNC brake-press-bent constructionUV-resistant powder coatingNo-drill installationCompatible with many OEM and aftermarket winchesFitmentPolaris RZR XP 1000: 2014-2023Polaris RZR XP 4 1000: 2014-2023
From $84.95
Chromoly-steel constructionRedesigned CV joints for high articulation anglesSynthetic greaseTear-resistant boots and sealsStronger-than-OEM replacementOne-year warranty excluding bootsFitmentPolaris RZR XP 1000: 2014-2023Polaris RZR XP 4 1000: 2014-2023Polaris RZR XP 1000 High Lifter...
$211.95
3/16-inch steel constructionReinforces A-arm mounts, frame supports, and shock mountsCompatible with OEM and SuperATV A-armsFitmentPolaris RZR XP 1000: 2014-2023Polaris RZR XP 4 1000: 2014-2023
From $189.95
Billet aluminum constructionWider spider and reinforced towersCompatible with the OEM secondary clutch2-way bearing with no engine brakingIncludes clutch assembly, rollers, and roller pinsWeights and springs are not included3-year warrantyFitmentPolaris RZR...
$1,112.95
Sold individually. Price is for one mounted tire and wheel.
$623.90
Sold individually. Price is for one mounted tire and wheel.
$598.90
Designed for year-round riding—can be closed, vented, or fully openMade of 1/4” polycarbonate—250x stronger than glass and 25x stronger than acrylicUtilizes our proprietary XR Optic Hard CoatingFits the contours of...
From $389.95
Need Help Choosing the Right Ball Joint? Super Duty 300M For the hardcore rider. SuperATV’s strongest ball joint on the market is 2.25x stronger than stock. Can withstand 29,000 lbs...
From $49.95
Made with self-lubricating UHMWLow wear characteristics give you more miles than stock bushingsCNC machined for a perfect fitIncludes enough bushings to replace all 4 front A-armsFitmentPolaris RZR XP: 2024-2025Polaris RZR...
$172.95
Adjustable fan speeds360° adjustable ventsIncludes defrost hoses and ventsBuilt-in shutoff valve5.2 amps at 13.6 voltsCapable of 20,000 BTU at 135 CFMHigh-grade radiator hoses—rated -40°F to 285°FIP67 ratingFitmentPolaris RZR XP: 2024+Polaris...
From $529.95
Shaft diameter is .5” larger than stockShaft wall is .120” vs stock’s .088”Made of 4130 chromoly tubing (stock is plain carbon steel)Includes a prop shaft guardBillet aluminum carrier bearingUses a...
From $1,218.95
Nearly 2 times stronger than stockMade with 4340 chromoly steelProprietary heat treatment for superior strength and longevityOperates at high CV anglesA massive increase in shaft sizeField and lab tested for...
$249.95
Protects against debris and the elementsMade of 1/4” polycarbonate—250x stronger than glass and 25x stronger than acrylicPreinstalled bulb seal for effortless installationOptional proprietary XR Optic Hard Coating for unmatched scratch...
From $119.95
Designed for year-round riding—can be closed, vented, or fully openMade of 1/4” polycarbonate—250x stronger than glass and 25x stronger than acrylicOpt for our proprietary XR Optic Hard Coating for unmatched...
From $324.95
Adjustable fan speeds360° adjustable ventsIncludes defrost hoses and ventsBuilt-in shutoff valve5.2 amps at 13.6 voltsCapable of 20,000 BTU at 135 CFMHigh-grade radiator hoses—rated -40°F to 285°FIP67 ratingFitmentPolaris RZR XP 1000:...
From $529.95
Shaft diameter is .5” larger than stockShaft wall is .120” vs stock’s .088”Made of 4130 chromoly tubing (stock is plain carbon steel)Uses a strong and versatile CV jointMade of 4130...
From $333.95
Two times stronger than stockMade with 4340 chromoly steelProprietary heat treatment for superior strength and longevityOperates at high CV anglesA massive 4mm increase in shaft sizeField and lab tested for...
$249.95
(12) Large bushings(4) Small bushings(6) Replacement metal sleevesFitmentPolaris RZR XP 1000: 2014–2023Polaris RZR XP 4 1000: 2014–2023
From $122.95
Need Help Choosing the Right Ball Joint? Super Duty 300M For the hardcore rider. SuperATV’s strongest ball joint on the market is 2.25x stronger than stock. Can withstand 29,000 lbs...
From $49.95
Ensures smooth, friction-free movement of the hub assemblyRubber-coated exterior creates a seal at the hub for constant pressureDesigned to keep out water, dirt, and sandPacked with marine-grade grease for optimal...
$44.95
Available in 6061 billet aluminum or A380 cast aluminumGreaseable and fully sealed for durability in any conditionsSelf-aligning bearing reduces vibrationLocking collar keeps bearing secureTwo-piece design makes installation a breezeFitmentPolaris RZR...
From $105.95
Made with ultra-strong aramid fiber cord to prevent separationBuilt for high strength, flexibility, and heat resistanceHigher power transfer through your clutchSmooth engagementBuilt for thousands of miles of abuseFitmentPolaris RZR XP...
$180.95
Uses sintered copper pads for extreme durabilityFour times more durable than stockMade with a steel backing plateExcellent gripping power in wet or dry conditionsFitmentPolaris RZR XP 1000: 2014–2023Polaris RZR XP...
$59.95
Straight upper radius-arm pair for 2024–2026 Polaris RZR XP 1000 two-seat models.
From $249.00
Heavy-duty left-and-right steering tie-rod kit built for the verified 2017–2018 rack, spindle, thread, and travel requirements.
From $449.99
Model-specific rear protection built around the 2017–2018 frame, body, exhaust, hitch, suspension, tire, cargo, and service-clearance requirements.
From $699.99
Model-specific front protection built around the 2017–2018 frame, body, radiator, winch area, tire, and service-clearance requirements.
From $699.99
Model-specific left-and-right tubular tree-kicker slider pair. The bent outer rail helps push the machine away from trees and rocks while the reinforced inner structure transfers impacts into verified chassis mounting...
From $749.99
A separate formed flat-plate slider design—not the tubular tree-kicker style. The model-specific formed-steel shell wraps the outside and underside of the rocker with a smooth angled boat-side surface and internally...
From $849.99
Left-and-right high-clearance lower radius-arm pair with a boxed profile designed to improve ground clearance while retaining the verified 2017–2018 mounting geometry.
From $449.00
Left-and-right straight upper radius-arm pair built around the verified 2017–2018 rear suspension geometry.
From $249.00
Model-specific left-and-right straight upper rear radius-arm pair using J Fab’s fixed-geometry, factory-bushing design family. This listing is for the upper radius arms only; lower arms are sold separately. Final brackets,...
From $249.00
Clean up the rear suspension with J Fab straight upper radius arms.
From $249.00
Clean up the rear suspension with J Fab straight upper radius arms.
From $249.00
Clean up the rear suspension with J Fab straight upper radius arms.
From $249.00
Straight upper radius arms for 2020–2026 Kawasaki KRX 1000 models.
From $249.00
Model-specific heavy-duty left-and-right steering tie-rod kit. J Fab will verify rack-side and knuckle-side attachment details, total length, thread direction, steering travel, wheel and brake clearance, and any lift or aftermarket...
From $449.99
A separate formed flat-plate slider design—not the tubular tree-kicker style. The model-specific 1/8-inch formed-steel shell wraps the outside and underside of the rocker with a smooth angled boat-side surface, an...
From $1,049.99
Model-specific heavy-duty left-and-right steering tie-rod kit. J Fab will verify rack-side and knuckle-side attachment details, total length, thread direction, steering travel, wheel and brake clearance, and any lift or aftermarket...
From $449.99
A separate formed flat-plate slider design—not the tubular tree-kicker style. The model-specific 1/8-inch formed-steel shell wraps the outside and underside of the rocker with a smooth angled boat-side surface, an...
From $849.99
Model-specific heavy-duty left-and-right steering tie-rod kit. J Fab will verify rack-side and knuckle-side attachment details, total length, thread direction, steering travel, wheel and brake clearance, and any lift or aftermarket...
From $449.99
A separate formed flat-plate slider design—not the tubular tree-kicker style. The model-specific 1/8-inch formed-steel shell wraps the outside and underside of the rocker with a smooth angled boat-side surface, an...
From $1,049.99
Model-specific heavy-duty left-and-right steering tie-rod kit. J Fab will verify rack-side and knuckle-side attachment details, total length, thread direction, steering travel, wheel and brake clearance, and any lift or aftermarket...
From $449.99
A separate formed flat-plate slider design—not the tubular tree-kicker style. The model-specific 1/8-inch formed-steel shell wraps the outside and underside of the rocker with a smooth angled boat-side surface, an...
From $849.99
A separate formed flat-plate slider design—not the tubular tree-kicker style. The model-specific 1/8-inch formed-steel shell wraps the outside and underside of the rocker with a smooth angled boat-side surface, an...
From $1,049.99
A separate formed flat-plate slider design—not the tubular tree-kicker style. The model-specific 1/8-inch formed-steel shell wraps the outside and underside of the rocker with a smooth angled boat-side surface, an...
From $849.99
Model-specific left-and-right high-clearance lower rear radius-arm pair using J Fab’s approved boxed lower-arm design family. This listing is for the lower radius arms only; upper arms are sold separately. Final...
From $449.00
High-clearance lower radius arms for the Honda Talon 1000X-4.
From $449.00
Model-specific left-and-right high-clearance lower rear radius-arm pair using J Fab’s approved boxed lower-arm design family. This listing is for the lower radius arms only; upper arms are sold separately. Final...
From $449.00
Model-specific left-and-right tubular tree-kicker slider pair. The bent outer tube follows the long four-seat body and both doors, while the inner structure transfers impacts into verified chassis mounting points instead...
From $749.99
Model-specific rear protection built around the platform’s actual frame, body, exhaust, hitch, suspension, tire, cargo, and service-clearance requirements. The listing is for the rear bumper only; final brackets, hardware, and...
From $699.99
Model-specific front protection built around the platform’s actual frame, body, radiator, winch, tire, and service-clearance requirements. The listing is for the front bumper only; final brackets, hardware, and installed clearances...
From $699.99
Model-specific left-and-right tubular tree-kicker slider pair. The bent outer tube follows the long four-seat body and both doors, while the inner structure transfers impacts into verified chassis mounting points instead...
From $949.99
Model-specific rear protection built around the platform’s actual frame, body, exhaust, hitch, suspension, tire, cargo, and service-clearance requirements. The listing is for the rear bumper only; final brackets, hardware, and...
From $699.99
Model-specific front protection built around the platform’s actual frame, body, radiator, winch, tire, and service-clearance requirements. The listing is for the front bumper only; final brackets, hardware, and installed clearances...
From $699.99
Model-specific left-and-right tubular tree-kicker slider pair. The bent outer tube follows the long four-seat body and both doors, while the inner structure transfers impacts into verified chassis mounting points instead...
From $749.99
Model-specific rear protection built around the platform’s actual frame, body, exhaust, hitch, suspension, tire, cargo, and service-clearance requirements. The listing is for the rear bumper only; final brackets, hardware, and...
From $699.99
Model-specific front protection built around the platform’s actual frame, body, radiator, winch, tire, and service-clearance requirements. The listing is for the front bumper only; final brackets, hardware, and installed clearances...
From $699.99
Model-specific left-and-right tubular tree-kicker slider pair. The bent outer tube follows the two-seat rocker and rear tire opening, while the inner structure transfers impacts into verified chassis mounting points instead...
From $749.99
Model-specific rear protection built around the platform’s actual frame, body, exhaust, hitch, suspension, tire, cargo, and service-clearance requirements. The listing is for the rear bumper only; final brackets, hardware, and...
From $699.99
Model-specific front protection built around the platform’s actual frame, body, radiator, winch, tire, and service-clearance requirements. The listing is for the front bumper only; final brackets, hardware, and installed clearances...
From $699.99
Model-specific rear protection built around the platform’s actual frame, body, exhaust, hitch, suspension, tire, cargo, and service-clearance requirements. The listing is for the rear bumper only; final brackets, hardware, and...
From $699.99
Model-specific left-and-right tubular tree-kicker slider pair. The bent outer tube follows the two-seat rocker and rear tire opening, while the inner structure transfers impacts into verified chassis mounting points instead...
From $749.99
Model-specific rear protection built around the platform’s actual frame, body, exhaust, hitch, suspension, tire, cargo, and service-clearance requirements. The listing is for the rear bumper only; final brackets, hardware, and...
From $699.99
Front bumper for 2019–2023 Polaris RZR XP 1000 models.
From $699.99
Honda Talon 1000R · 2019–2026
From $249.00
High-clearance lower radius arms for the 2024 Honda Talon 1000R.
From $449.00
Item may vary by make/model · Dash/window frame not included
The base price includes the switch-panel insert only. The surrounding factory dash/window frame shown in the installed photo is not included.
From $149.99
High-clearance lower radius-arm pair for 2019–2023 Polaris RZR XP 1000 models.
From $449.00
Model-specific left-and-right tubular tree-kicker slider pair. The bent outer tube follows the two-seat rocker and rear tire opening, while the inner structure transfers impacts into verified chassis mounting points instead...
From $749.99
Model-specific front protection built around the platform’s actual frame, body, radiator, winch, tire, and service-clearance requirements. The listing is for the front bumper only; final brackets, hardware, and installed clearances...
From $699.99
Model-specific left-and-right high-clearance lower rear radius-arm pair using J Fab’s approved boxed lower-arm design family. This listing is for the lower radius arms only; upper arms are sold separately. Final...
From $449.00
Billet steering tie-rod kit for Kawasaki KRX 1000 and KRX4 platforms. Professional installation followed by a complete steering alignment, travel, and clearance check is recommended before operation.
From $449.99
COMING SOON — not yet available for purchase.
Coming Soon$499.99
COMING SOON — not yet available for purchase.
Coming SoonFrom $449.00
COMING SOON — not yet available for purchase.
Coming SoonFrom $249.00
COMING SOON — not yet available for purchase.
Coming SoonFrom $849.99
COMING SOON — not yet available for purchase.
Coming SoonFrom $749.99
COMING SOON — not yet available for purchase.
Coming SoonFrom $699.99
COMING SOON — not yet available for purchase.
Coming SoonFrom $699.99
Vehicle-specific SXS battery hold-down systems planned for platforms J Fab can physically measure and validate.
Coming SoonFrom $79.99
High-clearance fabricated tube-door system in development for the Kawasaki KRX 1000.
Coming SoonFrom $1,099.99
Displayed pricing is provisional and may change before release.
Coming SoonFrom $349.99
